Sienna X Digital Double Wax Heater

Description

Ideal for both Salons and Therapists on the go.

Specifications:

• Inner Bucket 1000cc: diameter = 12.4cm, heigh = 12cm.
• Inner Bucket 500cc: diameter: 12.4cm, height = 6.2cm.
• Dimensions: 350mm x 160mm x 155mm.
• Voltage: 450 W (220/240 V · 50 Hz).
• Weight: 2.6kg.

Features:

• 2 separate heating chambers (0.5 Litre and 1 Litre).
• Each digital chamber can heat different waxes independently or simultaneously.
• Temperature adjustment controls.
• Includes 2 containers with scraper bar and handle.
• Normal & fast heat modes.
• Suitable for Warm, Hot and Paraffin waxes.
• Class 1 Electrical Product.

Directions For Use:

1. Remove the lid and take out the inner containers.
2. Fill the inner containers with wax of your choice and then place them back into the heater.
3. Plug the heater into the mains power supply. Switch the power supply on. To confirm the unit is operative, the indicator light will come on.

1 Litre Chamber: Normal heating mode

1. Remove the heater lid and fill the inner container with wax of your choice.
2. Plug the heater into the mains power supply. Turn the power supply switch on (1). To confirm the unit is operative, the indicator light will come on.
3. Press and hold on to the ‘M’button for 2 seconds.
4. Once the heater is on, the temperature will rise to reach a default setting of 80°C. “80” will be shown on the temperature Display. Use the ‘Temperature Up’ and ‘Temperature Down’ buttons to control the heating temperature from 50°C to 90°C.
5. After use, set the heater to standby by pressing the ‘M’ button for 2 seconds.
6. To fully turn the heater off, press the power supply switch to ‘o’. The indicator light will turn off.

1 Litre Chamber: Fast heating mode

1. Remove the lid and fill the inner container with wax of your choice.
2. Plug the heater into the mains power supply. Turn the power supply switch on. To confirm the unit is operative, the indicator light will come on.
3. Press and hold on to the ‘M’ button for 2 seconds.
4. Using the ‘Temperature Up’ and ‘Temperature Down’ buttons, set the temperature of the heater to a working temperature of your choice between 50°C to 90°C.
5. Press the ‘M’ button for a further 1 second to turn on the Fast heating mode. To quit the Fast heating mode at any time, press the ‘M’ button again for 1 second to return to the default heating mode.
6. Once Fast heating mode is selected, “HI” will be shown on the Temperature Display.
7. The heater will remain in Fast Heat Mode “HI” for 15 minutes. After this time, the heater will default back to the previously set working temperature.
8. After use, set the heater to standby by pressing the ‘M’ button for 2 seconds.
9. To fully turn the heater off, press the power supply switch to ‘o’. The indicator light will turn off.

500ML Chamber:

1. Repeat the process as per the above, using buttons 5, 6 & 7 to control the 500ml chamber.
2. Both 500ml and 1 litre chambers can be used independently or simultaneously, depending on your requirements.

Additional Information:

• Warm Wax: To empty warm wax into the heater, ensure the inner bucket is in the chamber you are using and using the scrape bar as a support, tilt the warm pot so it is angled at 45 degrees and wax can pour into the middle of the bucket cleanly.
• Hot Wax: Pour beads/block of hot wax into the chamber of choice, set to the temperature as per wax heating instructions.
• PARAFFIN WAX: Please follow the manufacturer’s heating instructions.
• Try to always use the scraper bar rather than the side of the bucket, this will keep your heater clean and tidy reducing cleaning between clients as well as preventing wax to fall under the metal inner buckets, which will prolong the lifetime of your heater.
• Each week or more frequently if you are not using the scraper bar enough, as the heater cools, remove the inner buckets and wipe around both the heater chambers and outside of the inner buckets with wax cleaner and dry.
• If you use your scraper all the time, this cleaning will be minimal
• Gently wipe around the heater overall with wax cleaner. For the digital area, we recommend you use hot soapy water as over time the font will disappear with continued cleaning with harsh chemicals.
• Use the lid to speed up heating times and overnight to help keep clean from dust etc.
• Always complete a touch and heat test on yourself and your client before starting your wax treatment to test wax heat and sensitivity