Brow Code Stain Hybrid Brow Dye – Perfecto Brown

Description

Brow Code Stain Hybrid Dye has made all your staining dreams come true.

Directions For Use:

Hybrid Brows:

1. Remove all eye makeup before staining the eyebrows.
2. In order to achieve the optimum staining results, the eyebrows should be dry and free of all oils and sebum as this can create a barrier against all Brow Code Hybrid Dyes and it will not adhere to the surface layer of the skin or the hair.
3. Mix the Stain Hybrid Dye and Cream Oxidant into a creamy paste using an application stick or brush. The mixing ratio is generally 1:1 Stain Hybrid Dye to Oxidant.
4. When the client has closed their eyes, apply Stain Hybrid Dye to the eyebrows working with care and precision to ensure a clean result.
5. Ensure the Stain Hybrid Dye is directly placed in the shape you are wanting to achieve as it will immediately begin to stain the skin.
6. Application times vary from 5 to 12 minutes depending on the desired intensity and results. We recommend a total time of 10 minutes, however, please watch the dye closely to see how the colour is processing. For the best result try removing the front of the brow after a few minutes for an ombre effect.
7. At the end of the developing time ensure the Stain Hybrid Dye is wet by retouching with some of the mixture.
8. Remove excess Stain Hybrid Dye with a dry cotton tip, blending from the front of the brow to the tail being careful not to smudge outside the brow.
9. Remove any remaining Stain Hybrid Dye with a slightly damp cotton pad wiping from the front of the brow to the tail. Be careful not to use a scrubbing motion.
10. As the Brow Code Stain Hybrid Dye is richly pigmented and processes quickly, we recommend using a dry cotton tip to clean up the edges of the brow as you apply, ensuring nothing stains outside the lines.

Airbrush Brows:

1. Begin by running water through the Airbrush for approximately 15 seconds. Adjust the dial to allow a 2-3 mm opening, which controls the Stain’s airflow.
2. Perform a test spray on a cotton round to check for even dispensing. Test across all pressure modes. We recommend using your machine on the lowest setting.
3. Once you achieve an even spray, the Airbrush is ready for use.
4. Complete a patch test before proceeding with the service.
5. Cleanse the brow area with an oil-free foaming cleanser. Rinse with a damp cotton pad. Ensure brows are dry and free of oils and sebum for optimal Stain Hybrid Dye adhesion.
6. Brush the brows and map as desired.
7. Use mapping thread or paste to shape the brows as desired.
8. Starting from the head of the brow, apply the bottom Brow Border at a slight upward angle towards the arch, following the natural brow shape. Continue applying the border from the arch to the tail at a slight downward angle. Ensure the Brow Borders are aligned neatly and press down firmly with fingers or the back of tweezers. Inadequate application may allow Stain to seep through.
9. Repeat the same process for the top Brow Border, ensuring symmetry and secure placement.
10. Ensure the borders are secure to prevent the Stain Hybrid Dye from seeping beyond the desired area. Visually inspect the ‘Brow Borders‘ on both eyebrows to ensure symmetry.
11. Shake the Stain Hybrid Dye bottle well before use. Fill the dispenser with a 1:1 ratio of Stain with Liquid Oxidant 3%, or approximately 8 drops Stain to 8 drops Liquid Oxidant, adjusting based on the size of your dispenser.
12. Set the Airbrush Machine to your preferred speed and test spray onto a clean dry cotton pad to check the shade and consistency of the spray.
13. Spray a light layer of Stain from the tail of the eyebrow towards the front of the brows. Let this layer set for 1-2 minutes. You may choose to work on each brow individually or simultaneously.
14. Apply a second layer of Stain, following the same direction – from tail to front. Allow this layer to set for 1-2 minutes before proceeding.
15. For the final layer, work from the tail towards the front, ensuring thorough coverage for the client’s desired look. The number of layers will determine the saturation level for the desired outcome. Typically, 2-3 layers are recommended for most clients. For a more natural appearance, 1-2 layers is recommended.
16. After completing the Stain layering, carefully remove the Brow Borders. If required, use Brow Code Tint Remover or a damp cotton tip to clean the edges of the Airbrush brows.
17. Allow the Stain to remain on the brows for 8 to 12 minutes, depending on the desired intensity and saturation level.
18. Gently remove the Stain with a damp cotton pad, starting from the head of the brow and moving towards the tail. Be careful not to scrub back and forth to avoid removing the Stain Hybrid Dye from the skin.
19. Brush the eyebrows into place to complete the Airbrush Stain application process.

Ombre Airbrush Brow Technique:

1. Apply each layer of Stain from the tail towards the middle front of the brow.
2. Once the desired layers are applied, using a gentle speed apply the Stain at an upward angle, softly moving from the front to the mid-front of the brow, ensuring a soft shading effect.   Allow this to set for a few seconds before removing the Brow Border.
3. If the ombre effect seems too dark, lightly use a cotton tip to blend and soften the Stain as needed.
4. Allow the Stain to remain on the brows for 8 to 12 minutes, depending on the desired intensity and saturation level.
5. Gently remove the front of the brows by stamping a damp cotton round into the brow and swiping upwards softly.
6. Blend the front of the brow with a clean brush to soften the Stain line between the front and the body of the brow and continue processing for the desired time.
7. Gently remove the Stain with a damp cotton pad, starting from the head of the brow and moving towards the tail. Be careful not to scrub back and forth to avoid removing the Stain Hybrid Dye from the skin.
8. Brush the eyebrows into place to complete the Airbrush Stain application process.

Aftercare:

Important Note: The Stain Hybrid Dye can feel darker on the first day, however, please note this is an important step of the process as the stain continues to oxidise on the skin and settle into its finished shade. The stain will start to fade gradually as soon as the brows are wet.

• Avoid using makeup and facial cleansers around the brow area for the following 24 hours.
• Avoid prolonged exposure to direct sunlight, the use of sunbeds, saunas, steam rooms, and swimming pools for 24 hours.
• Avoid exfoliating and using anti-ageing products around the brow area for at least two to three days prior to and post-treatment.
• Avoid using any self-tanning products on the face for around two to three days on either side of the treatment.
• Avoid the temptation to over-touch the brow area after treatment. Touching with fingers can lead to oils entering open pores and clogging them.

Ingredients:

Lawsonia Inermis Extract (Henna), Rosa Damascena Flower Extract, Crocus Sativus Flower Extract, Aloe Barbadensis Leaf Extract, Propylene Glycol, Isopropyl Alcohol, P-Phenylenediamine, p-Aminophenol, m-Aminophenol, Phenoxyethanol, 4-Amino-2-Hydroxytoluene, Ethanolamine, Sodium Sulfite, Disodium EDTA, Carbomer, Citrus Limon Peel Oil (Lemon Oil), 1-Naphthol, 1,5-Naphthalenediol.

Additional Information:

• Ensure a patch test is performed before first-time use on a client.